Cross-market equivalents: same job, five model numbers

Selection guide

Cross-market equivalents: same job, five model numbers

The easiest assumption in cross-border sourcing is that an equivalent model must exist. Structurally it usually does, but every market asks for its own cable approval, plug approval and cord-set approval, so an equivalent is a quoting aid, never a compliance argument.

Equivalents by duty level

  • Light two-core flat: H03VVH2-F · SPT-1 / SPT-2 · VFF · 60227 IEC 52 · AS Light Duty 250/250 · Fio Paralelo NM 42-C5
  • General three-core: H05VV-F · SJT / SJTW · VCTF · 60227 IEC 53 · AS Ordinary Duty 250/440 · Cabo PP
  • Heat and heating appliances: H05V2V2-F · HPN / HSJ / SPT-3 · HHFF / HVCTF · 60227 IEC 57 · V-90HT
  • Vacuum and light flexible: H03VV-F · SVT / SVE · VCTFK · RVV light · AS Light Duty · Cabo PP small section
  • Outdoor and wet: H05RN-F / H07RN-F · SJTW / SOOW / SJEOW · PNCTF · YZW / YCW · AS Heavy Duty
  • Heavy and site: H07RN-F · STW / SOOW / SRDT · VCT 600 V · YC / YCW · AS Heavy Duty 0.6/1 kV
  • Low smoke zero halogen: H07ZZ-F / H05Z1Z1-F · UL-listed custom · custom compound · FR-LSH · AS/NZS custom
  • Oil and screening: H05VV5-F · SJTOW / SJTOOW · screened custom · RVVYP (60227 IEC 74) · industrial custom
  • High flex and drag chain: H03RR-H · SJOOW-class rubber · rubber flexible · YZ / YZW · heavy rubber
  • High current and EV: H07RN-F large section · SRDT / EVJT · VCT large section · YC large section

Why they cannot simply be swapped

  • Different voltage class: 300/300 V, 300/500 V and 450/750 V stand for light, general and heavy mechanical duty, and the gap between a 300 V and a 600 V UL cord includes the jacket wall
  • Different material and temperature: PVC 70 °C, heat-resistant PVC 90 °C, rubber 90 °C, silicone 150-200 °C
  • Different detail: core colour code, low-temperature bending, tolerances, jacket printing
  • Different units: AWG does not map one-to-one onto mm², so convert before quoting

Three certificates, or the assembly does not ship

Cable, plug and cord set: one missing layer stops the whole assembly.
Cable, plug and cord set: one missing layer stops the whole assembly.

Cable approval (UL 62 / HAR / JIS C 3306 / CCC / AS/NZS 3191), plug approval (UL 817 / ENEC / PSE / CCC / SAA) and cord-set approval. The third layer is the one most often missed: the cable and the plug both carry certificates, but the assembled cord set was never tested for the destination market.

A practical way to consolidate stock

Keep a HAR-based family as the common part numbers, maintain UL 62 separately for North America, and treat LSZH, EV and drag-chain constructions as their own developments with their own approvals. The part-number count stays manageable and no compliance gap is left behind.

전체 뉴스